Service Case ISOBUS

Service-Case ISOBUS

The Service Case ISOBUS contains the hardware required to perform diagnostics on Müller-Elektronik MIDI 3.0 job computers. This includes diagnostic of the ISOBUS as well as installation of software or configurations.

With the basic service vehicle harness, it is possible to operate a job computer and terminal without a tractor with ISOBUS basic vehicle harness. In addition to the Service Case, only the corresponding MIDI job computer, a terminal and a power source (socket) are required for this.

A diagnostic connector connector to which the supplied PCAN-Dongle can be connected is also available on the basic service vehicle harness, This makes it easy to perform software updates or configuration adjustments on a job computer at the desk.

Besides the basic service vehicle harness and the associated cables, two Y cables are also included that can be used for diagnostic on implements. These can be mounted in the tractor cabin between the terminal and the ISOBUS basic vehicle harness and connected to the PCAN-Dongle. The connection is made with the Sub-D and CPC connectors of our terminals.

S-BOX

S-Box

The S-Box is an additional module for sprayer control.  It can be installed directly under the terminal and facilitates the manual switching of individual sections.

Direct access to the individual sections makes the S-BOX ideal for localized treatment. It is available for implements with up to 18 sections. Thanks to the high-precision application, cost savings and increased yields are inevitable.

ISOBUS joysticks

The ISOBUS joystick is a “must” as optional equipment to control any implement. It facilitates operation so the driver can concentrate on production processes.

The joystick can be retrofitted on almost any tractor and is easy to install. Thanks to the AUX-N functionality, the buttons can be individually assigned.

 

ISOBUS joysticks

The ISOBUS joystick is a “must” as optional equipment to control any implement. It facilitates operation so the driver can concentrate on production processes.

The joystick can be retrofitted on almost any tractor and is easy to install. Thanks to the AUX-N functionality, the buttons can be individually assigned.

 

Apps / App & Go®

The advantages of the APP & GO® concept include flexibility and guaranteed future.

In the first step, each user selects a terminal that corresponds to their requirements. In addition to the standard apps that are already activated on the terminal, other pre-installed apps can be unlocked as required.

ISOBUS Weather Station

The Müller-Elektronik weather station is the first ISOBUS weather station on the market. The sensor informs you immediately about changes in the wind speed and direction, temperature, relative humidity and pressure, and evaporation rates (Delta T). The weather conditions can also be saved by the ISOBUS Task-Controller for documentation purposes if required.

These values support decision-making while working on the field to select the correct application. The internal GPS receiver and the electronic two-axes gyroscope enable displaying of both the apparent and actual wind speed and direction.

ISOBUS Weather Station

The Müller-Elektronik weather station is the first ISOBUS weather station on the market. The sensor informs you immediately about changes in the wind speed and direction, temperature, relative humidity and pressure, and evaporation rates (Delta T). The weather conditions can also be saved by the ISOBUS Task-Controller for documentation purposes if required.

These values support decision-making while working on the field to select the correct application. The internal GPS receiver and the electronic two-axes gyroscope enable displaying of both the apparent and actual wind speed and direction.

TRACK-Guide Desktop

TRACK-Guide Desktop

TRACK-Guide Desktop is an application that visualises field data recorded by the terminal. It displays elements such as field boundaries, track data and guidance lines.

From this data, field data reports and field size, area and overlap statistics can be created. Furthermore, these elements can be exported in SHP format for further use with other software products.

S-BOX

S-Box

The S-Box is an additional module for sprayer control.  It can be installed directly under the terminal and facilitates the manual switching of individual sections.

Direct access to the individual sections makes the S-BOX ideal for localized treatment. It is available for implements with up to 18 sections. Thanks to the high-precision application, cost savings and increased yields are inevitable.

S-BOX

S-Box

The S-Box is an additional module for sprayer control.  It can be installed directly under the terminal and facilitates the manual switching of individual sections.

Direct access to the individual sections makes the S-BOX ideal for localized treatment. It is available for implements with up to 18 sections. Thanks to the high-precision application, cost savings and increased yields are inevitable.