Bedienungsanleitung - Starting application

Operator manual

Table of contents

Starting application

Procedure

To start the application:

þ: The tractor with the field sprayer is on the field.

þ: You have configured the job computer.

þ: You have folded out the boom.

1.: Ensure that all prerequisites have been fulfilled.

2.: - Start application.

⇨: In manual mode:
The field sprayer starts the application.
Spray cones appear under the boom icon:

⇨: In automatic mode:
The field sprayer will be prepared for application.
As long as the field sprayer does not move, the following icon appears in the work screen:

3.: In automatic mode:
Start driving and exceed the minimum speed for the automatic regulation (parameter: "Regulation off below").

⇨: As soon as the minimum speed is exceeded, the field sprayer starts the application.
Spray cones appear under the boom icon:

⇨: You have started application.

Immediate application

There may be situations where you want to start spraying while the sprayer is still at a standstill. For example, when you have stopped on the field.

To start immediate application in automatic mode:

þ: The tractor with the field sprayer is on the field.

þ: You have configured the job computer.

þ: You have folded out the boom.

þ: Automatic mode is activated.

1.: Press and hold the application button on the joystick for three seconds.

⇨: The field sprayer starts the application.
Spray cones appear under the boom icon:

2.: Start driving within 5 seconds and exceed the minimum speed for the automatic regulation (parameter: "Regulation off below"). Otherwise, the application will be automatically terminated.