Company logo
InstructionsSearchContentsHome
 
Operating the implement on the fieldOperating the hydraulic system with the job computerOperating bout markers
 
 
Operating bout markers
 
You can use bout markers as you work to mark a pass.
 
 
Function icon
Meaning
 FS_Spuranreißer_links
Use the left bout marker only. The bout marker is not changed when lifting the implement.
e.g. to work on the headland.
 FS_Spuranreißer_keiner
Deactivate both bout markers.
 FS_Spuranreißer heben wg. Hindernis
Lift the bout marker to pass over obstacles. The implement itself is not lifted.
 FS_Spuranreißer 3
Use both bout markers at the same time.
You can use this function e.g. if you do not have a pre-emergence marker on the implement.
 FS_Spuranreißer_rechts
Use the right bout marker only.
The bout marker is not changed when lifting the implement.
e.g. to work on the headland.
 FS_Spuranreißer 4
Use the bout markers alternately.
The bout marker is always changed when you lift the implement.
 FS_Spuranreißer_wechseln
Change the bout markers manually.
The bout marker is changed when you press the function key.
 
 
 
Procedure
 
 
 
1.
On the work screen, press:
 FS_Hydraulikfunktionen anzeigen >  FS_Spuranreißer 4
2.
Select the side on which the bout marker should be lowered first. Press:  FS_Spuranreißer_links or  FS_Spuranreißer_rechts
⇨
The work screen shows which bout marker has been lowered.
3.
To activate automatic bout marker control press:  FS_Spuranreißer 4
⇨
The left bout marker is lowered.
4.
Press  FS_Spuranreißer 4 again to switch between the left and the right bout markers.
⇨
Depending on the settings, an icon for the bout marker appears on the work screen.