Preparing Spraylight for use
Entering sprayer parametersConfiguring the nozzle typeCalculating the output and amount applied by the nozzles on your machine
Entering sprayer parametersConfiguring the nozzle typeCalculating the output and amount applied by the nozzles on your machineCalculating the output and amount applied by the nozzles on your machine
On the Nozzle choice screen, you can calculate how much you can apply with the selected nozzle. This calculation should help you find the nozzle that is appropriate for your task.
The screen includes three parameters which you can configure yourself. Your inputs for these parameters have no impact on the application. These values are used to calculate the application amount and nozzle output.
Parameters in the Nozzle choice screen:
- ▪
- Working speed
- ▪
- Minimum pressure value
- ▪
- Maximum pressure value
The pressure range defined by the pressure values should always be within the specification defined by the nozzle manufacturer.
In addition to these three parameters, the following parameters are taken into consideration when calculating nozzle output:
- ▪
- Type of nozzle
- ▪
- Working width of sprayer
The calculation results can be seen on the Nozzle choice screen:
Nozzle choice
Procedure
- Mark the desired parameter.
- Confirm.- ⇨
- The data input screen appears.
- 4.
- Input the desired value for a parameter in the data input screen.
- ⇨
- The calculated output of the nozzle is shown on the Nozzle choice screen.