Setting the regulation value
In Automatic mode, the spray pressure of the nozzles is adapted to the current speed of the sprayer. The adjustment should ensure that the volume of spray liquid that is applied is exactly what you defined in the set value. The regulation value plays a decisive role in this.
Mode of operation
The regulation value adjusts the regulation speed:
- ▪
- The higher the regulation value, the faster the spray pressure is adjusted.
- ▪
- The lower the regulation value, the more slowly the spray pressure is adjusted.
When setting the regulation value, take note of the following:
- ▪
- If, during movement at constant speed, the current application volume jumps around the set value, you must reduce the regulation value.
- ▪
- If, when the speed changes, the application volume does not adjust to the set value quickly enough, you must increase the regulation value.
Procedure
- 2.
- Input the desired regulation value in the Reg.Value line.
- ⇨
- The new regulation value appears in the Parameters 1 screen.