Connecting the GPS receiver to the terminal
Find out how to connect a GPS receiver from Müller-Elektronik to the terminal from the operating instructions for the GPS receiver.
When mounting the terminal in a vehicle which is already fitted with a GPS receiver and another ISOBUS terminal, you must:
- ▪
- connect the GPS signal to the terminal manufactured by Müller-Elektronik.
- ▪
- configure the GPS receiver.
Procedure
To connect the terminal to a GPS receiver which is already installed on the vehicle:
- 1.
- Find out how you can direct the signal from the GPS receiver to the terminal. This can differ for every vehicle or GPS receiver: Vehicles can be fitted with a GPS socket in the cab, a GPS receiver with a serial output or serial outputs to the ISOBUS terminal.
- 2.
- Check what cable you will use to connect GPS signal to the serial socket on the terminal manufactured by Müller-Elektronik.
- 3.
- Connect the GPS signal to the serial socket of the terminal manufactured by Müller-Elektronik.
- 4.
- Configure the GPS receiver so that it can communicate with the terminal manufactured by Müller-Elektronik. You can find the necessary specifications for this in the table below.
- 5.
- Activate the “Standard” GPS driver on the terminal.
Configuration