Anbau- und Bedienungsanleitung - Configuring the tractor connector types

Configuring the tractor connector types

The connector type can differ among various tractors and mounted or trailed implements. Per default, the connector type is always set to “Unknown”.

Please note that when you select a different connector type or multiple different connector types, the automatic list of connections no longer works. You then have to list the connections manually.

The following connector types are possible:

▪: Unknown

▪: Drawbar

▪: 3-point hitch mounted

▪: 3-point hitch semi-mounted

▪: Hitch hook

▪: Clevis coupling

▪: Piton-type coupling

▪: CUNA hitch

▪: Ball-type hitch

Function icon	Meaning
	Adds a new connector type.
	Deletes the marked connector type.
	Edits the marked connector type.

Procedure

1.: - Open the Tractor ECU application.

2.: Tap “Settings”.

⇨: The existing tractor profiles appear.

⇨: If a tractor profile is activated, most of the other function icons are greyed-out.

3.: - To edit a tractor profile or to create a new one, you must deactivate the activated tractor profile.

4.: Tap on the tractor profile to be edited.

5.: - Call up the parameter list.

⇨: The parameters are displayed.

6.: - Open the tractor geometry screen.

7.: - Call up the screen for configuring the front connector types.

⇨: The “Front - connector type” screen appears.

8.: - Add a connector.

9.: Select the connector type.

10.: Enter the distance between the rear axle and the front mounting or attachment point.

11.: - Confirm.

12.: Optionally, you can edit or delete other connector types.

13.: - Repeat this procedure for the rear connector types. Enter the distance between the rear axle and the rear mounting or attachment point.

14.: - Terminate the entry.

⇨: The tractor geometry can now be viewed and edited.