Caution! The storage could not be initialized. If the problem still persists after a restart, please contact ME customer service.

The database could not be created on the data medium.

Restart the terminal.

Active profile cannot be removed!

An attempt was made to delete the currently selected machine profile.

Select another machine profile and then delete the desired machine profile.

An error has occurred while reorganizing the storage.

The data medium was removed during reorganizing.

Re-insert the data medium and re-start the reorganization

The data medium is full.

Delete unnecessary data from the data medium and try again.

The data medium is damaged.

Use a new data medium.

Could not find DGPS configuration file!

The internal file containing the DGPS settings could not be found.

Contact our Service team in order to reinstall the software.

The test phase is expired. Please contact your dealer.

The test phase is expired.

Request a license.

Unlock the software.

No USB memory device is inserted!

 

Insert the USB memory device.

Export failed!

The data medium was removed before or during the export.

Re-insert the data medium and re-start the export.

Writing is not allowed on the data medium.

Disable write protection on the data medium.

The data medium is full or damaged.

Delete unnecessary data from the data medium and try again.

Error!

 

Contact Customer service.

GPS signal has been lost!

The serial connection to the GPS receiver has been interrupted.

The position can no longer be determined.

Check and re-connect the cable connections to the GPS receiver.

GPS signal too weak!

The GPS signal quality is too weak, most likely due to obstructions.

Check the mounting of the GPS receiver and your current position. The receiver must be in open view to the sky.

No DGPS available!

No DGPS is available due to signal obstruction.

Check the mounting of the GPS receiver and your current position. The receiver must be in open view to the sky.

No DGPS is available due to a failure of the correction data service, e.g. EGNOS, WAAS.

Check the general availability of the service. For EGNOS / WAAS, check and set the proper correction satellites.

No compatible format found for this prescription map. Please create a new format.

No suitable format could be found using the prescription map content. No compatible format has been created.

The major formats have been provided. Other formats can be incorporated by the users themselves.

No profile available!

No machine profile is available!

Create a new machine profile.

Could not read DGPS configuration from GPS receiver!

The serial connection to the GPS receiver has been interrupted.

Check and re-connect the cable connections to the GPS receiver.

Could not read e-Dif configuration from GPS receiver!

The serial connection to the GPS receiver has been interrupted.

Check and re-connect the cable connections to the GPS receiver.

Could not read data from tilt module!

The serial connection to the GPS TILT module has been interrupted.

Check and re-connect the cable connections.

Saving failed!

The data medium was removed before or during saving.

Re-insert the data medium and re-start the save process.

Writing is not allowed on the data medium.

Disable write protection on the data medium.

The storage medium is full or damaged.

Delete unnecessary data from the data medium and try again.

Invalid status!

 

Contact Customer service.

Unknown error!

You want to work with SECTION-Control, but there is no connected job computer that supports SECTION-Control.

Connect a suitable job computer or deactivate SECTION-Control.

No sections have been recognized!

No sections are configured in the ISOBUS job computer. Or the connected ISOBUS job computer does not support SECTION-Control.

If possible, configure the sections on the job computer. If the job computer does not support SECTION-Control, you cannot use it.

The implement does not have a swath width!

The working width or geometry have not been configured in the ISOBUS job computer.

Configure the ISOBUS job computer.

Correctly set the working width in the job computer; contact the implement manufacturer.

No task started!

You have configured the ISOBUS-TC to work with ISO-XML. Therefore, TRACK-Leader expects a task.

No task was started in ISOBUS-TC.

Start task in ISOBUS-TC or deactivate the use of ISO-XML in ISOBUS-TC.

No valid device data recognized!

The working width or geometry have not been configured in the ISOBUS job computer.

Configure the ISOBUS job computer.

RTK signal lost!

No RTK signal is available due to signal obstruction.

The GPS receiver and base station must be in open view to the sky.

No mobile network reception.

 

You are too far away from the base station (or from a different signal source).

 

The device data is still loading.

If this message appears for a long time, the terminal is connected to a job computer that is not responding.

Connect a different job computer to the terminal. It is possible that you cannot use SECTION-Control with this job computer, because the job computer does not support SECTION-Control.

The list of connections in the ISOBUS-TC app was not configured. Read the instructions for the terminal.

Configure the list of connections in ISOBUS-TC.

No implement recognized!

TRACK-Leader has not received any information through the connected job computer or there is no connected job computer.

Connect a job computer that supports SECTION-Control