Company logo
Operating InstructionsSearchTable of contentsHome
 
Basic control principlesField boundaryRecording the field boundary during operation
 
 
Recording the field boundary during operation
 
To record the field boundary during operation, you must proceed as follows. The more precisely you record the field boundary, the more precisely the sections can be switched afterwards in the boundary area.
 
 
 
Procedure
 
 
 
þ
A job computer is connected and the list of connections is correctly set.
1.
Start a new navigation.
2.
 Gestängeposition_Auswahl - Select the boom position that you want to use for recording the field boundary, depending on the driving direction and side of the field.
3.
 Acknowledge_color - Confirm.
4.
 Grenzlinienaufzeichnung_Aufzeichnung starten - Start recording the field boundary.
5.
Drive around the field.
6.
 Grenzlinienaufzeichnung_Aufzeichnung pausieren - Interrupt the recording, e.g. if special driving manoeuvres are required.
⇨
When driving with the recording interrupted, the terminal will show a dashed line.
7.
 Grenzlinienaufzeichnung_Aufzeichnung fortsetzen - Resume the recording.
⇨
The terminal draws a straight line between the position at which you paused the recording and the position at which you want to resume recording.
8.
Resume the recording.
⇨
Please note that when finishing the recording, the terminal will draw a straight line from the current position to the starting point of the recording.
9.
 Grenzlinienaufzeichnung_Aufzeichnung bestätigen - Finish recording the field boundary.
⇨
The terminal draws a straight line from the current position to the starting point of the recording.
⇨
You have recorded the field boundary.
⇨
The total area of the field will be shown on the navigation screen.