Company logo
Operating InstructionsSearchTable of contentsHome
 
Basic control principlesField boundaryRecording restricted areas
 
 
Recording restricted areas
 
If there is an obstacle on your field that you always want to drive a detour around, you can record a restricted area.
When recording restricted areas, you have to proceed in a similar way to recording field boundaries.
 
 
 
Procedure
 
 
 
þ
You have recorded the field boundary of the field for which you want to record a restricted area.
þ
You are inside the field.
1.
 Gestängeposition_Hindernisse_Auswahl - Select the boom position that you want to use for recording the restricted area, depending on the driving direction and side of the field.
2.
 Acknowledge_color - Confirm.
3.
 Grenzlinienaufzeichnung_Aufzeichnung Hindernisse starten - Start recording the restricted area.
4.
Drive around the area that you want to record.
5.
 Grenzlinienaufzeichnung_Aufzeichnung Hindernisse pausieren - Interrupt the recording, e.g. if special driving manoeuvres are required.
⇨
When driving with the recording interrupted, the terminal will show a dashed line.
6.
 Grenzlinienaufzeichnung_Aufzeichnung Hindernisse fortsetzen - Resume the recording.
⇨
The terminal draws a straight line between the position at which you paused the recording and the position at which you want to resume recording.
7.
Resume the recording.
⇨
Please note that when finishing the recording, the terminal will draw a straight line from the current position to the starting point of the recording.
8.
 Grenzlinienaufzeichnung_Aufzeichnung Hindernisse bestätigen - Finish recording the restricted area.
⇨
The terminal draws a straight line from the current position to the starting point of the recording.
⇨
You have recorded the restricted area.
⇨
The area of the restricted area will be subtracted from the total area of the field. Only the area to be applied will be shown.