Bedienungsanleitung - Configuring TRACK-Leader AUTO® for NAV-900

Configuring TRACK-Leader AUTO® for NAV-900

Vehicle profile

The vehicle profiles are configured using a tablet PC in the steering job computer. At this point, you must select the appropriate profile for the vehicle.

Via the function icon TL_Speichern

you can transfer the corresponding profile from the receiver to the terminal. The vehicle profile is then available both on the receiver and on the SD card in the terminal.

If you have inserted a USB memory device, you can also copy profiles from the Übertragen_Stick

SD card to the USB memory device or from the Übertragen_SD-Karte

USB memory device to the SD card.

If you want to copy a vehicle profile from the USB memory device to the SD card, follow these instructions:

▪: You can only use vehicle profiles that are adapted for the NAV-900. The profiles must have the file extension .vdb or .cfg.

▪: You can also transmit several vehicle profiles simultaneously.

Procedure

Proceed as follows if you want to copy vehicle profiles from the USB memory device to the SD card

1.: On the USB memory device, create a folder named “NAV900-Profiles”.

2.: Copy the desired vehicle profiles into the created folder.

3.: Insert the USB memory device into the terminal.

4.: - Tap to open the configuration menu for TRACK leader AUTO.

5.: - Copy the data.

⇨: You can now select the desired profile in the “Vehicle profile” parameter.

Firmware version receiver

Firmware version of the GNSS receiver.