Saving field data
Procedure
- 1.
- On the start screen of the TRACK-Leader application, tap on “Storage”.
- 2.
- Insert an USB memory device into the terminal. The files will be saved directly to the USB memory device.
.- ⇨
- The keyboard appears.
- 4.
- Enter the name under which the field data should be saved.
- Confirm.- ⇨
- The data is saved on the SD card.
- ⇨
- The field will be deleted from the Overview.
- 6.
- If you want to continue to treat the field directly, you will need to load this.
shp files
When saving, the loaded field will be converted to shp format. The files are saved in the “SHP” folder on the USB memory device.
When converting into shp format, files with field data are created. The terminal inserts a corresponding name addition:
- ▪
- _boundary = File with the field boundary.
- ▪
- _obstacles = File with the obstacle points.
- ▪
- _workareas = File with the applied areas. The applied areas can only be converted into shp format. However, they cannot be opened again.
- ▪
- _condensedworkareas = In this file, the total applied area is divided into zones. If the terminal was working with an ISOBUS job computer, the used target rate is saved for each zone. This type of data can be used to create an as applied map with the GIS program. This, in turn, can be converted into a prescription map.
- ▪
- _guidancepath = File with the guidance lines.
- ▪
- _headland = Area of the headland.