With an ISO-XML task
Use this method if you are using the "ISOBUS-TC" application.
Procedure
- þ
- If you are working with an ISOBUS job computer, it has to be connected to the ISOBUS.
- þ
- If you are working without an ISOBUS job computer, you have to select the corresponding machine profile for the implement. In addition, you can configure the working width of the implement in the "Tractor ECU" application. See: Terminal operating instructions.
- þ
- You have set the "Work with ISO-XML?" parameter to "Yes" in the ISOBUS-TC application.
- 1.
- Start a task in the "ISOBUS-TC" application. You can read how to do this in the ISOBUS-TC operating instructions.
- 2.
- Open the TRACK-Leader application.
- ⇨
- The work screen appears with all of the data for the ISO-XML task.
- ⇨
- If the work screen does not appear, this means that you have not fulfilled a number of the preconditions.
- ⇨
- If the
icon appears in the center of the display screen, there is no connection to the GPS receiver, and you will not be able to continue work. Install and configure a GPS receiver.
- 3.
- To find out about the information appearing on the work screen, read this chapter: Information on the work screen
- 4.
- To find out what you should do next, read this chapter: Operating procedures