When using parallel guidance only
This chapter is of interest to you if you have a simple system without an ISOBUS job computer. For example, the TRACK-Guide II terminal without additional applications. You can also operate other terminals according to these instructions, as long as you do not connect an ISOBUS job computer and the ISOBUS-TC application remains deactivated.
- 1.
- Drive to the field.
- 2.
- If you have already processed this field in the past, load its field data. If you want to process a new field, you must ensure that no other field data is loaded. In this case, you must discard the opened record.
- 3.
- If you have a prescription map, you can import it now.
- 4.
- Deactivate the "SECTION-Control" parameter on the "Settings" | "General" screen.
- 5.
- On the "Setting" | "Machine profiles" screen, select the profile corresponding to the machine combination you are using. Or create a new machine profile.
- 6.
- Prepare a new navigation.
- 8.
- If you are using a GPS receiver that works with EGNOS or WAAS, set the reference point.
- 10.
- Create the first AB line.
- 11.
- Mark the field boundary (optional).
- 12.
- Process the field on parallel tracks. To do so, use the light bar.
- 13.
- If you are approaching an obstacle, you can mark its position.
- 14.
- When the work is completed, save the data or export it for later processing in a GIS application.