When using the task management ISOBUS-TC
If you plan your ISO-XML tasks with the help of a Farm Management Information System (FMIS) on a PC and then want to work with the display, you will need to use the ISOBUS-TC application.
In this case, you must not save data in the TRACK-Leader application. All information generated while working will be transferred directly to ISOBUS-TC and saved on the SD-Card in the file with the task.
The biggest difference compared to operation without ISOBUS-TC lies in the starting and termination of a navigation as well as the storage location of the data. Other functions are operated as described in these instructions.
- 1.
- Open the TRACK-Leader application.
- 2.
- If you are using an implement with an ISOBUS job computer, activate the "SECTION-Control" parameter on the "Settings" | "General" screen. If not, deactivate this parameter.
- 3.
- Open the ISOBUS-TC application.
- 4.
- Start a task. To do so, read the ISOBUS-TC operating instructions.
- 5.
- When the task has been started, open the TRACK-Leader application.
- 6.
- If you are using a GPS receiver that works with EGNOS or WAAS, set the reference point.
- 7.
- If you are not using SECTION-Control, start the recording.
- 8.
- If you are using SECTION-Control, activate the automatic mode of SECTION-Control or operate the implement manually.
- 9.
- Create the first AB line.
- 10.
- Mark the field boundary (optional).
- 11.
- Process the field on parallel tracks. To do so, use the light bar.
- 12.
- If you are approaching an obstacle, you can mark its position.
- 13.
- When the work is completed, terminate the task in the ISOBUS-TC application.