Bedienungsanleitung - Combined guidance line

Operating Instructions

Table of contents

Combined guidance line

In the “AB and contour” guidance mode, you can draw a guidance line consisting both of parallel straight lines and curves.

Function icon	Function	Result
	Sets point A.
	Starts the recording of a contour line.	Sets a red point, which is connected to the last point with a straight line.
	Pauses the recording of the contour line.	Sets a red point, starting at which a straight line will be recorded.
	Sets the last point and terminates the recording of the AB line.

Procedure

þ: “A-B and contour” guidance mode is activated.

1.: Position the vehicle at the starting point of the desired AB line.

2.: - Set the first point.

⇨: Point A appears on the terminal screen.

3.: Keep driving straight ahead as long as you need a straight guidance line.

⇨: While driving, a line will be drawn behind the vehicle on the terminal screen.

⇨: The line is dashed and straight.

4.: - Terminate the recording of the straight AB line.

⇨: The icon is replaced by the icon.

⇨: A small red point will be set on the screen.

⇨: Now you can record a curve as a guidance line.

⇨: While driving, a line will be drawn behind the vehicle on the terminal screen.

5.: If you want to draw a new straight line again, you can tap the icon again, and continue like in step 3.

6.: - Set the second point to terminate the recording.

⇨: Point B appears on the terminal screen.

⇨: Points A and B are connected with a line.